Self Piercing Rivet (SPR) Combo Kit - Extraction and Insertion Tools

21970-SPR-Extraction-Tool-Product-outlined.png__PID:aaad456b-0bc5-43e2-bd44-360e924e5b30

SAVE 0%

Self Piercing Rivet (SPR) Combo Kit - Extraction and Insertion Tools

$153.77

$225.32

Save: 32%

Quantity

STECK Manufacturing

Part: STC21960-COMBO

STECK Self Piercing Rivet (SPR) Combo Kit – Efficiently extract and insert rivets without expensive hydraulic tools using impact wrench compatibility.

Combo kit includes both Extraction Tool (STC21970) and Insertion Tool (STC21960)
Made from high-grade ASTM 20G steel with a 1/2" thick frame and #8 hex bolt
Works with 3/4” or 19mm socket and 1/2” impact wrench
Simplifies rivet removal and installation in automotive repairs
Cost-effective alternative to hydraulic tools

STECK Self Piercing Rivet (SPR) Combo Kit – Efficiently extract and insert rivets without expensive hydraulic tools using impact wrench compatibility.

Categories: Auto Body & Collision, NEW PRODUCTS, Paint Body & Equip., Specialty Tools, Stocking Stuffers

STECK's new Self Piercing Rivet (SPR) Combo Kit Tools (STC21960-COMBO) - Include both the Extraction Tool and Insertion Tool.

The tools are made from a high-grade hardened ASTM 20G grade steel that forms a 1/2" thick steel frame and has a #8 hex bolt with hardened tip.

Self-Piercing Rivets are easily pushed out and inserted with your 3/4” or 19mm socket using your 1/2” impact wrench.

No need for expensive hydraulic tools to remove and insert self-piercing rivets.

Your new STECK Self Piercing Rivet (SPR) Combo Kit Includes (STC21960-COMBO):

Self-Piercing Rivet (SPR) Extraction Tool - STC21970

Self-Piercing Rivet (SPR) Insertion Tool - STC21960

How it works:

The Self Piercing Rivet SPR Combo Kit simplifies automotive rivet removal and repair and eliminates the very expensive hydraulic tools normally used to do the same job.

Simple steps for using your new STECK - Self Piercing Rivet (SPR) Combo Kit

Removing Self Piercing Rivets:

1) Follow the automotive manufacturers procedure to remove the trim panel and expose the rivets that need to be removed.

2) Insert the hardened tip of your Self Piercing Rivet (SPR) Extraction Tool hex bolt to the inside of the door. Hand tighten the bolt to the center of the backside of the rivet. Keep the body of the tool against the door flange.

3) Use an impact wrench with a 3/4” or 19mm socket to gradually tighten your Self Piercing Rivet (SPR) Extraction Tool hex bolt and push out the old rivet.

4) The impact wrench tightening process should only take 3-5 seconds before the rivet is pushed out.

Installing Self Piercing Rivets:

1) Place a new rivet on end of the magnetized tip of your Self Piercing Rivet (SPR) Insertion Tool hex bolt.

2) Align the rivet where it is to be inserted and gradually finger tighten the Self Piercing Rivet (SPR) Insertion Tool until the rivet is held firmly against the metal.

3) Use an impact wrench with a 3/4” or 19mm socket to gradually tighten your Self Piercing Rivet (SPR) Insertion Tool hex bolt until it pushes the new rivet into the metal and compresses the new rivet completing the installation.

STECK's new Self Piercing Rivet (SPR) Combo Kit Tools (STC21960-COMBO) - Include both the Extraction Tool and Insertion Tool.

The tools are made from a high-grade hardened ASTM 20G grade steel that forms a 1/2" thick steel frame and has a #8 hex bolt with hardened tip.

Self-Piercing Rivets are easily pushed out and inserted with your 3/4” or 19mm socket using your 1/2” impact wrench.

No need for expensive hydraulic tools to remove and insert self-piercing rivets.

Your new STECK Self Piercing Rivet (SPR) Combo Kit Includes (STC21960-COMBO):

Self-Piercing Rivet (SPR) Extraction Tool - STC21970

Self-Piercing Rivet (SPR) Insertion Tool - STC21960

How it works:

The Self Piercing Rivet SPR Combo Kit simplifies automotive rivet removal and repair and eliminates the very expensive hydraulic tools normally used to do the same job.

Simple steps for using your new STECK - Self Piercing Rivet (SPR) Combo Kit

Removing Self Piercing Rivets:

1) Follow the automotive manufacturers procedure to remove the trim panel and expose the rivets that need to be removed.

3) Use an impact wrench with a 3/4” or 19mm socket to gradually tighten your Self Piercing Rivet (SPR) Extraction Tool hex bolt and push out the old rivet.

4) The impact wrench tightening process should only take 3-5 seconds before the rivet is pushed out.

Installing Self Piercing Rivets:

1) Place a new rivet on end of the magnetized tip of your Self Piercing Rivet (SPR) Insertion Tool hex bolt.

2) Align the rivet where it is to be inserted and gradually finger tighten the Self Piercing Rivet (SPR) Insertion Tool until the rivet is held firmly against the metal.

STECK Self Piercing Rivet (SPR) Insertion and Extraction Combo Kit (STC21960-COMBO)

STECK's Self Piercing Rivet (SPR) Insertion and Extraction Combo Kit includes both the SPR Extraction Tool and SPR Insertion Tool, offering an efficient solution for auto body repair without the need for expensive hydraulic tools.

STECK Self Piercing Rivet (SPR) Insertion and Extraction Combo Kit Key Features

High-Grade Construction: Made from hardened ASTM 20G grade steel, featuring a 1/2" thick steel frame and a hardened #8 hex bolt tip for durability.
Easy Self-Piercing Rivet Extraction and Insertion: Compatible with a 3/4" or 19mm socket and a 1/2" impact wrench, making self-piercing rivet removal and installation straightforward.

Included in the STECK Self Piercing Rivet (SPR) Insertion and Extraction Combo Kit

Self Piercing Rivet (SPR) Extraction Tool - Model STC21970
Self Piercing Rivet (SPR) Insertion Tool - Model STC21960

How the STECK Self Piercing Rivet (SPR) Insertion and Extraction Combo Kit Works

The Self Piercing Rivet Insertion and Extraction Combo Kit simplifies automotive and auto body repair by enabling quick and easy self-piercing rivet extraction and installation. This kit eliminates the need for expensive hydraulic tools, saving both time and money.

How to Extract Self Piercing Rivets

Prepare the Area: Follow manufacturer instructions to remove the trim panel and expose the rivets.
Position the Extraction Tool: Insert the hardened tip of the SPR Extraction Tool hex bolt into the door. Hand tighten until the bolt is centered on the rivet's backside.
Use an Impact Wrench: Attach a 3/4" or 19mm socket to the SPR Extraction Tool and gradually tighten to push out the old rivet.
Quick Process: The impact wrench should only take 3-5 seconds to fully extract the rivet.

How to Install Self Piercing Rivets

Attach the Rivet: Place a new rivet onto the magnetized tip of the SPR Insertion Tool hex bolt.
Align and Position: Align the rivet to the desired location and finger tighten until the rivet sits securely.
Complete Installation: Use an impact wrench with a 3/4" or 19mm socket to tighten the SPR Insertion Tool until the rivet is pushed into the metal and secured.

With the STECK Self Piercing Rivet Insertion and Extraction Combo Kit, you can install and extract self-piercing rivets quickly and efficiently for professional-grade auto body repair results.