Skin an aluminum door in
approximately 15 minutes!

The AI Skin Zipper is an air hammer driven door skinning tool with a wider opening for any 1 millimeter aluminum skin and 1.5 millimeter door shell.

Attach a new aluminum door skin with rope hem in approximately 15 minutes.

Aluminum skins are prone to cracking but the AI Skin Zipper prevents cracking from happening because it produces a rope hem. When completed, minimal finishing may be required on the corners and body lines.

The AI Skin Zipper reduces technician arm fatigue from hammer and dolly method. It also allows the technician time to skin the door before the two part bonding agent has set. The self-lubricating head will skin approximately 10 doors and is easy to replace when it wears out.

1. Step One allows the technician to form the edge of the door skin to an initial 45° angle by holding the tool at a right angle to the door. No hammer and dolly work required here.

2. Step Two allows the technician to complete the final form by using the tool at a 45° angle. Two side slots are included for left and right application. When completed minimal finishing may be required on the corners and body lines.

 

21892 Aluminum Skin Zipper - $38.00

21893 Aluminum Skin Zipper
           Replacement Head - $27.00

Step #1

Form edge of door skin to 45 degrees.

Step #2

Finish crimp.

The AI Skin Zipper2 allows you to reach tighter areas than the original AI Skin Zipper, perfect for aluminum door window flange openings.

The AI Skin Zipper2 can now skin the window opening, which could not be done in the past. Its self-lubricating reinforced nylon head will crimp regular or adhesive bonded skins. The AI Skin Zipper2 hems or crimps the door skin to the door shell at the window opening, in an easy two-step process.

21896 Aluminum Skin Zipper 2 - $37.00

21897 Aluminum Skin Zipper 2
           Replacement Head - $27.00

See our other aluminum repair products

Aluminum Conversion Kit

Soft Strike Hard Cap for Body Hammer

Use your steel body
hammer on aluminum!

Step #1

Form edge of door skin to 45 degrees.

Step #2

Finish crimp.